SoCal Exterior Services installs and repairs fences across the county, from clean horizontal cedar in Normal Heights to full vinyl perimeters in Chula Vista and ranch fencing out in Ramona and Poway. Posts set in concrete, straight lines, tight gates that stay square — the fundamentals done right the first time.
Fence styles we install
- Horizontal cedar and modern slat fences for a contemporary look
- Classic vertical dog-ear and board-on-board privacy fences
- Vinyl fencing for low-maintenance, salt- and rot-proof perimeters
- Ranch, post-and-rail, and equestrian fencing for acreage properties
- Gates — walk gates, double drive gates, and hardware that lasts
What makes a fence last in our climate
Most fence failures trace back to the posts. We set posts in concrete at a depth that resists our winds, use pressure-treated or naturally rot-resistant material at ground contact, and keep wood off the soil to slow termite and moisture damage. Coastal jobs get corrosion-resistant fasteners; inland jobs get material and finishes that hold up to relentless sun.
Gates are where cheap fences fall apart first. We build gates with proper bracing and heavy hinges so they do not sag, and we hang them to swing clean and latch square for years.
Repairs and storm damage
Not every fence needs replacing. We reset leaning posts, replace wind-snapped boards and rails, rebuild sagging gates, and match existing material so a repair blends in. After a windstorm we can get out quickly to secure a downed section and make your yard safe and private again.
What’s Included in Our Fence Installation & Repair Service
Every fence installation & repair project we take on is a complete scope, not a partial fix. Here’s what a typical job includes:
- Property-line confirmation, post-spacing layout, and utility and drainage checks
- Posts set plumb in concrete at a depth scaled to fence height and wind
- Straight, level framing with fasteners chosen for coastal or inland exposure
- Wood, horizontal cedar, vinyl, or ranch-rail materials to suit your look and budget
- Braced gates with heavy hinges, hung to swing and latch square
- Old-fence removal, haul-off, and a clean final walkthrough
Our Process
- 1Layout & locatesWe confirm the property line, mark post spacing, and note any utility or drainage concerns.
- 2Post settingPosts are set plumb in concrete at proper depth so wind and soil movement do not shift them.
- 3Framing & boardsRails and pickets go up straight and level with fasteners chosen for your exposure.
- 4Gates & hardwareGates are braced, hung, and adjusted to swing and latch cleanly under real use.
- 5Cleanup & walkthroughWe haul old material, clean the line, and walk the finished fence with you.
What Affects the Cost
We don’t publish flat prices, because an honest number depends on your specific property. Here’s what shapes the estimate — and what we’ll walk through with you on site, free of charge:
- Linear footage and fence height
- Material: pressure-treated pine vs. cedar vs. vinyl vs. ranch rail
- Number and size of gates, plus hardware quality
- Removal and disposal of an existing fence
- Terrain — slope, rock, and root conditions along the run
Why San Diego Chooses SoCal Exterior Services for Fence Installation & Repair
Posts set to last
Most fences lean because the posts were under-set. We set posts in concrete at proper depth so Santa Ana winds and soil movement do not shift them.
Matched to your exposure
Coastal jobs get corrosion-resistant fasteners against salt air; inland jobs get material and finishes that stand up to relentless sun.
Repairs, not just replacements
We reset leaning posts, replace wind-snapped boards and rails, and rebuild sagging gates — often for far less than a full replacement, matching existing material where we can.
Licensed and insured
A licensed, insured contractor since 2020 — and after a windstorm we can get out fast to secure a downed section and make your yard safe and private again.
Planning Your Fence: Material, Height, Layout, and Gates
A fence is a bigger set of decisions than “wood or vinyl,” and getting them right up front is what makes it last and look intentional. Material comes first, matched to your exposure: vinyl is the most maintenance-free and immune to rot, termites, and salt; cedar is the best-looking natural option and the standard for modern horizontal styles; pressure-treated pine is budget-friendly when kept off the soil; and ranch or post-and-rail suits acreage and horse properties. We compare the trade-offs honestly in wood vs. horizontal cedar fencing.
Height and layout are governed by both function and rules. Privacy fences run taller, garden and front-yard fences lower, and many jurisdictions and HOAs cap heights, restrict corner-visibility zones, and have their own approval process. We confirm the local requirements, lay the line to the property boundary, and plan around slopes, roots, and drainage so the run stays straight and plumb.
Gates are where fences fail first, so we plan them deliberately: braced, rigid frames on deep-set posts, heavy hinges, and quality latches sized to the gate. Coastal jobs get corrosion-rated hardware against the salt air. Get the posts, layout, and gates right and the fence stays square for years — and after a windstorm we handle storm damage and repairs fast.
- Material matched to coastal vs. inland exposure
- Height and layout that meet local and HOA rules
- Property-line confirmation and slope, root, and drainage planning
- Braced gates on deep-set posts with heavy, corrosion-rated hardware
- Repairs and storm-damage fixes, matching existing material
Serving San Diego County
We provide fence installation & repair across San Diego and all of San Diego County, including El Cajon, Chula Vista, National City, La Mesa, Santee. Not sure if you’re in our area? Call (323) 606-0255 and we’ll let you know.